Dal-Bo UK |  12A Shepheards Close
Dunkirk, Aylsham |  Norfolk NR11 6SZ
 
+44 (0)1263 732683
sa@dal-bo.dk
 

MaxiCut Standard & Options

The roller consists of a 610x7 mm steel drum, which has to be filled with water to give additional weight. The roller is fitted with 100 mm knives so the overal diameter is 810 mm. MaxiCut can work of speeds between 18-25 km/h so an area of 10 hectares can easily be covered in an hour. Due to the high operating speeds and demands put on the machine the drum is fitted with 70 mm steel axles and large taper roller bearings with double lip seals. MaxiCut is a simple yet powerful alternative to a mulcher or topper. It has a high output and will have cost saving advantages due to the relatively low running costs.

Click on the pictures for more detail

  • Whell trac eradicator
  • Front cage roller
  • Rear cageroller
  • Air brakers
For establishing crops the MaxiCut 600 can be fitted with Einböck P-Box Speed.
The roller consists of a 610x7 mm steel drum, which has to be filled with water to give additional weight. The roller is fitted with 100 mm knives so the overal diameter is 810 mm. MaxiCut can work of speeds between 18-25 km/h so an area of 10 hectares can easily be covered in an hour. Due to the high operating speeds and demands put on the machine the drum is fitted with 70 mm steel axles and large taper roller bearings with double lip seals. MaxiCut is a simple yet powerful alternative to a mulcher or topper. It has a high output and will have cost saving advantages due to the relatively low running costs.
MaxiCut is fitted with specially hardened knives, which at working speeds of 18-25 km/h ensures the desired division (and transformation) of the stubble. The chopping is efficiently done by 15 sets of knives that cover the full width of each drum. The drum transfers approximately 1000 kg of weight per metre across the working width. The root of the stubble is kept in the soil minimizing the leakage of nitrogen.
MaxiCut 600 is supplied as standard with 400/60x15.5 wheels.
Maxicut is an implement, which is developed to cope with the residual plants on the surface of the ground, without destroying the roots.
MaxiCut in transport position.
MaxiCut 300 - can be rear or front mounted.
Contact DAL-BO
 
You are welcome to contact us by phone or via the form below:
 
Select here:
*
Name:
*
E-mail:
*
Telephone:
*
Message:
 
DALBO UK
12A Shepheards Close
Dunkirk, Aylsham,
Norfolk, NR11 6SZ.
01263-732683
01263-732632
Steve Atkin
Sales Manager UK
 
+44 (0)7769 645319
sa@dal-bo.dk

 
Our company is credit worthy according to Bisnode's credit assessment system that is based on a number of decision rules. This credit rating is updated on a daily basis, and always shows the current rating and date.
Dal-Bo | Bindeballevej 69 | 7183 Randbøl | Phone:+45 75883500